Fixed-mounted front hitch SHL F

SHL F

Optimally adapted to the respective tractor type and nicely adjusted to the tractor design!

shl f v3

Models

Type
Lift capacity
Cat. - width
For tractors
SHL F4
4 kN (400 kg)
Cat.0 (Cat.1)
to 20 hp
SHL F6
6 kN (860 kg)
Cat.1 (Cat.0)
to 30 hp
SHL F8
8 kN (800 kg)
Cat.1 (Cat.0)
to 60 hp
SHL FM8
8 kN (800 kg)
Cat.1 (Cat.0)
to 60 hp
SHL F10
10 kN (1000 kg)
Cat.1
to 50 hp
SHL F17
17 kN (1700 kg)
Cat.2 (Cat.1)
to 70 hp
SHL F25
25 kN (2500 kg)
Cat.2
to 110 hp
SHL F35
35 kN (3500 kg)
Cat.2
to 150 hp
SHL F45
45 kN (4500 kg)
Cat.2
to 230 hp

Equipment

Standard equipment

  • Fixed- mounted version
  • Front hitch is optimally adapted to each tractor type and nicely adjusted to the tractor design
  • Modern design
  • lateral brackets are mounted to the front axle
  • Walterscheid quick hitch weld on hooks Cat. 2
  • a robust structural design
  • top quality – only the highest quality components are installed
  • foldable and removable lift arms (transport position)
  • bilaterally fastened suspended lift arms, which can be fixed – floating or fixed position
  • double-actinghydraulic cylinders
  • hardened ball joints on both cylinders
  • all bearings and pivot points can be lubricated
  • drawbar eye
  • holder for top link (central lever)
  • hydraulic hoses with quick couplings and a shut-off valve in the lifting pipe
  • Front hitch is painted dark grey (RAL 7021) or on customer request
  • fasteners

Additional Equipment

  • Walterscheid quick hitch weld on hooks Cat.1 or Cat.3L
  • lateral mounting brackets extended to the gearbox housing-bell or tractor cab
  • two additional flexible high-pressure hydraulic hoses with quick couplings installed on the cross-bracket
  • ” T-joint” for the  rear quick coupling of the tractor
  • reinforcing tensioning-pressurizing link under the tractor chassis for heavy-duty operations
  • hydraulic accumulator (oscillation damper) – protects the tractor with a heavy-duty attachment from shocks (oscillations) due to uneven roads
  • counter spring holder (for front rotary mower)
  • 7-pin socket (12V)
  • quick release mounting plate (utility plate) EURO Gr. 3 (DIN 76060 A, B)
  • top link (central lever) Cat. 1 or Cat. 2
  • triangular headstock Cat.0, Cat.1 or Cat.2
  • additional hydraulic control valves for the tractor

SHL FM8

  • FIXED mounted Front hitch for small tractors from 30-60 hp
  • mounted to the front axle
  • lifting force 800 kg (8 kN)
  • robust structural design
  • lateral consoles, fastened into front bridge
  • foldable (transport position) and removable lift arms
  • both-sided oscillating fastened lift arms, which can be fixed-swing compensation position and fixed position
  • width category Cat.1 or Cat.0
  • two-way hidraulic operation
  • tempered bearing joint balls on both cilinders
  • Walterscheid lower link hooks – quick coupler Cat.1
  • integrated tow bar clevis
  • hydraulic lines with quick clamps and closing valve in lift hoses
  • Front hitch ispainted in dark grey colour (RAL 7021)
  • screw materials (for self-assembly to a tractor)
  • weight: 105 kg

List of tractors on which SHL FM8 can be mounted

  • Same Solaris 35-45-55
  • Hürlimann Prince 35-45-55
  • Deutz Fahr Agrokid 210-220-230
  • Lamborghini R1.35-R1.45-R1.55
  • Lamborghini EGO 35-45-55

We are ready.
What about you?

We are happy to answer your questions and help you find the right solution.

The investment for the creation of the website is co-financed by the Republic of Slovenia and the European Union from the European Regional Development Fund. Co-financing was obtained through a digital marketing voucher.

© 2021 | Lešnik Lenart d.o.o. – All rights reserved

Website design: NAVDIH.NET