Detachable front hydraulic systems SHL H

SHL H

Optimally adapted to the respective tractor type and nicely adjusted to the tractor design!

snemljiva prednja hidravlika lesnik 4

Mounting

Front hydraulic linkage mounting (detachable)

montaza snemljive prednje hidravlike lesnik

Snow plow utility plate mounting.

montaza komunalne plosce za snezni plug lesnik

Models

Type
Lift capacity
Cat. - width
For tractors
SHL H17
17 kN (1700 kg)
Cat.2 (Cat.1)
to 70 hp
SHL H25
25 kN (2500 kg)
Cat.2
to 110 hp
SHL H35
35 kN (3500 kg)
Cat.2
to 150 hp
SHL H45
45 kN (4500 kg)
Cat.2
to 230 hp

Equipment

Standard equipment

  • Front hydraulic systemsDETACHABLE version
  • for alternating operation with other tractors
  • Front hydraulic systems are optimally adapted to each tractor type and nicely adjusted to the tractor design
  • modern design
  • a robust structural design
  • top quality – only the highest quality components installed
  • lateral brackets are mounted to the front axle
  • foldable and removable lift arms (transport position)
  • bilaterally fastened suspended lift arms, which can be fixed – floating or fixed position
  • double-acting hydraulic cylinders
  • hardened ball joints on both cylinders
  • all bearings and pivot points can be lubricated
  • Walterscheid quick hitch weld on hooks Cat. 2
  • drawbar eye
  • holder for top link (central lever)
  • hydraulic hoses with quick couplings and a shut-off valve in the lifting pipe
  • Paint RAL 7021 (dark grey) or on customer request
  • fasteners

Additional Equipment

  • Walterscheid quick hitch weld on hooks Cat.1 or Cat.3L
  • lateral mounting brackets extended to the gearbox housing-bell or tractor cab
  • two additional flexible high-pressure hydraulic hoses with quick couplings installed on the cross-bracket
  • ” T-joint” for the  rear quick coupling of the tractor
  • reinforcing tensioning-pressurizing link under the tractor chassis for heavy-duty operations
  • hydraulic accumulator (oscillation damper) – protects the tractor with a heavy-duty attachment from shocks (oscillations) due to uneven roads
  • counter spring holder (for front rotary mower)
  • 7-pin socket (12V)
  • quick release mounting plate (utility plate) EURO Gr. 3 (DIN 76060 A, B)
  • top link (central lever) Cat. 1 or Cat. 2
  • triangular headstock Cat.0, Cat.1 or Cat.2
  • additional hydraulic control valves for the tractor

We are ready.
What about you?

We are happy to answer your questions and help you find the right solution.

The investment for the creation of the website is co-financed by the Republic of Slovenia and the European Union from the European Regional Development Fund. Co-financing was obtained through a digital marketing voucher.

© 2021 | Lešnik Lenart d.o.o. – All rights reserved

Website design: NAVDIH.NET