Self-loading salt and sand disc spreader

Models

Type
Capacity
Spreading width
Spreading volume
Overall width
Overall height
Weight
PR 18
1,00 m3 (1000 L)
up to 9 m
0 ÷ 250 g/m²
1800 mm
1150 mm
520 kg
PR 18 (V)
1,45 m3 (1450 L)
up to 9 m
0 ÷ 250 g/m²
1800 mm
1400 mm
590 kg

Equipment

  • Cat. 2 3-point hitch for the rear hydraulic lift mechanism of the tractor
  • self-loading design with two (2) hydraulic cylinders (the tipping container enables self-loading of the spreading material)
  • hydraulic drive with powerful planetary hydraulic motor
  • powered by tractor hydraulics
  • dosing auger
  • mixing / crushing rotor located above the dosing auger
  • self-propelled rotating spreading disc
  • stainless steel spreading disc
  • mechanical adjustment of the spreading angle to the left / right (symmetrical or asymmetrical spreading)
  • protective grid above the mixing rotor
  • rear LED lamps (traffic signalling equipment)
  • LED work lamp
  • latch for opening and closing the discharge hatch
  • hot-dip zinc plated and painted container – excellent anti-corrosion protection
  • suitable for spreading sand, salt or mixture of both
  • ideal for parking lots, roads and walkways
  • recommended granulation of spreading material between 2 and 8 mm
  • electrical adjustment of the spreading angle to the left / right (instead of mechanical)
  • container extension (V)
  • protective tarp
  • camera
    • 7” (177.8 mm) colour LCD display with a bracket
    • wireless system – a wireless range of up to 100 meters
    • IR night recording vision with a range of up to 1.5 m
    • electrical cable with a cigarette lighter plug (ISO 4165 / SAE J563)
  • additional cover above the dosing auger
    for spreading fine salt
  • cat. 2 or cat. 3 top link (central lever)
  • electronic control of the spreading volume and width directly from the tractor cab (remote control)
  • control panel installed inside the tractor cab
  • 12V DC power supply
  • without the path-dependent spreading functionality
Electronic controller Lesnik
Electronic controller Lesnik
  • electronic controller for path-dependent spreading volume and width directly from the tractor cab (remote control)
  • control panel installed inside the tractor cab
  • 12V DC power supply

CAUTION!
The tractor must be equipped with a 7 pin signal socket (DIN 9684-1 / ISO 11786)!

Advantages of path-dependent spreading:

  • ensures the correct spreading dosage (g/m2)
  • ensures the correct spreading widths (m)
  • adjustment of the spreading symmetry
  • optimized work (advantage compared to manual adjustments)
  • saves spreading material (sand and salt)
  • economical and environmentally friendly
  • the operator can focus on driving instead of worrying about spreading (better road safety)
Path-dependent electronic controller Lesnik
Path-dependent electronic controller Lesnik

We are ready.
What about you?

We are happy to answer your questions and help you find the right solution.

The investment for the creation of the website is co-financed by the Republic of Slovenia and the European Union from the European Regional Development Fund. Co-financing was obtained through a digital marketing voucher.

© 2021 | Lešnik Lenart d.o.o. – All rights reserved

Website design: NAVDIH.NET